Spring and summer are rainy seasons. Many drivers refuse the arrival of the rainy season. In addition to reducing driving safety in rainy days, it will also delay a lot of work. So when the rainy season comes, how should the fully automatic mixer deal with it?
When working in rainy season, it is important to take preventive measures. The day before driving, you should have a detailed understanding of the weather conditions. Although the weather forecast may be a "pit", it is necessary to be prepared.
Before driving out, the engine, chassis, tires, brakes, wipers, air conditioners, hydraulic systems, mixing devices, etc. of the vehicle shall be carefully checked to eliminate faults to ensure their normal operation. The cab should also be equipped with rain-proof equipment in case of emergency. At the same time, it is necessary to ensure that there is enough water in the water tank, and carry water reducing agent with the vehicle to facilitate the mixing of concrete.
Before starting the vehicle, ensure that the tank body of the mixer is in the stop position to prevent damage caused by excessive pressure of the reducer and hydraulic system after the vehicle is started.
If you are unlucky and encounter rainy and snowy weather during transportation, don't worry. Don't move forward at high speed for fear of affecting the quality of concrete. The first thing to do is to slow down, ensure your personal safety, and confirm whether the brake is in normal working condition. Because when the vehicle is driving on a wet road, the grip of the wheels will decrease sharply with the increase of the vehicle speed, so the way of "braking" should be adopted to reduce the vehicle speed without losing control.
For roads that are not hardened, do not venture forward, or you may fall into mud. When encountering a waterlogged road, you should make sure that it is safe to pass after observation. For unfamiliar journeys, you should follow the route of the vehicle in front.
According to the situation, turn on the headlights, fog lights and double flashing lights in time to warn the passing vehicles and increase the safety factor. Before turning, reduce the driving speed, slow down the speed of the can, and turn the turn as far as possible, because the center of gravity of the mixer truck is high and it is easy to roll over. When driving out of the waterlogged road, you can gently step on the brake pedal to make the moisture on the brake pad and brake disc evaporate in time and restore the braking effect. If the rain is heavy, in order to ensure driving safety, it is better to choose sheltered places to avoid rain and ensure the quality of concrete.
Don't be careless when you arrive at the destination. The construction site is wet and slippery after the rain. You can move forward after ensuring safety. Pay attention to the impact of reinforcement, stones and other debris on the tires. During the feeding process, you should be able to keep an eye on it and take a rest. If there is any mistake, you will lose more than you gain. After unloading, the mixing tank shall be washed carefully to prevent concrete from sticking to the tank body, which cannot be removed after solidification.
Due to environmental pollution, rain often causes corrosion to vehicles. Small parts such as circuits and lights may also be affected, so after the rain stops, card users should carefully check some parts that are easily affected by the rain, such as instruments, joysticks, universal shafts, hydraulic systems, etc. If any abnormal phenomenon is found, timely repair and maintenance shall be carried out to ensure the normal and safe operation of the mixer next time. Come to our website for more relevant content Ask!