永利总站ylzz欢迎你_主站

您好,欢迎光临莱州聚峰机械有限公司网站!

服务热线

400-879-1999

你所在位置: 首页 >> 新闻资讯 > 行业资讯
行业资讯

检查自动上料搅拌车的零件的事项有哪些?

来源:/ 时间:2021-06-02

(1)泵和水系统组件必须完整且无泄漏。
(1) The pump and water system components must be complete and leak free.
(2)装置检查规则:
(2) Safety device inspection rules:
1.液压系统必须配备装置,以防止过载和液压冲击。溢流阀的调节压力不得超过液压泵的额定压力。
1. The hydraulic system must be equipped with safety devices to prevent overload and hydraulic shock. The regulating pressure of the safety relief valve shall not exceed the rated pressure of the hydraulic pump.
2.自动上料搅拌车侧面和背面的混凝土保护罩完好无损。
2. The concrete protective cover on the side and back of the automatic feeding mixer is intact.
3.自动上料搅拌车必须配备灭火设备。
3. Automatic feeding mixer must be equipped with fire fighting equipment.
(3)检查系统规则。
(3) Check the system rules.
永利总站ylzz欢迎你_主站
1.气缸必须与支撑轮良好接触,并且不得失去控制,移动或明显变形。
1. The cylinder must be in good contact with the support wheel, and must not lose control, move or deform obviously.
2.混合罐框架的缓冲器不应破裂或损坏。混合槽,料斗,主卸料槽和辅助卸料槽的叶片不应明显磨损或变形。
2. The buffer of mixing tank frame shall not be broken or damaged. The blades of mixing tank, hopper, main discharge tank and auxiliary discharge tank shall not be obviously worn or deformed.
3.搅拌槽,进料斗,主排水槽或辅助排水槽中不得有干净的混凝土块。
3. There shall be no clean concrete blocks in the mixing tank, feed hopper, main drainage tank or auxiliary drainage tank.
(4)防洪系统检查规则:
(4) Flood control system inspection rules:
1.取力器工作平稳,压力符合设计要求,无泄漏。
1. The power take-off works smoothly, the pressure meets the design requirements, and there is no leakage.
2.液压系统的组件必须完整,并且系统的工作压力必须符合手册的要求。
2. The components of the hydraulic system must be complete, and the working pressure of the system must meet the requirements of the manual.
3.液压油的类型,质量,数量和使用必须符合相关规定。当热泵运行时,油温不得超过80°C,并且管路连接必须可靠。
3. The type, quality, quantity and use of hydraulic oil must comply with relevant regulations. When the heat pump is running, the oil temperature should not exceed 80 ℃ ° C. And the pipeline connection must be reliable.
4.每个防洪组件的运动必须灵活可靠。
4. The movement of each flood control component must be flexible and reliable.
上一篇:搅拌车液压系统的两种类型介绍
下一篇:永利总站ylzz欢迎你一生也经历了很多时期!
tag:永利总站ylzz欢迎你,永利总站ylzz欢迎你_主站,永利总站ylzz欢迎你_主站
当前位置: 首页 - 新闻资讯 > 行业资讯

检查自动上料搅拌车的零件的事项有哪些?

作者:中科聚峰永利总站ylzz欢迎你厂家 时间:2021-06-02

(1)泵和水系统组件必须完整且无泄漏。
(1) The pump and water system components must be complete and leak free.
(2)装置检查规则:
(2) Safety device inspection rules:
1.液压系统必须配备装置,以防止过载和液压冲击。溢流阀的调节压力不得超过液压泵的额定压力。
1. The hydraulic system must be equipped with safety devices to prevent overload and hydraulic shock. The regulating pressure of the safety relief valve shall not exceed the rated pressure of the hydraulic pump.
2.自动上料搅拌车侧面和背面的混凝土保护罩完好无损。
2. The concrete protective cover on the side and back of the automatic feeding mixer is intact.
3.自动上料搅拌车必须配备灭火设备。
3. Automatic feeding mixer must be equipped with fire fighting equipment.
(3)检查系统规则。
(3) Check the system rules.
永利总站ylzz欢迎你_主站
1.气缸必须与支撑轮良好接触,并且不得失去控制,移动或明显变形。
1. The cylinder must be in good contact with the support wheel, and must not lose control, move or deform obviously.
2.混合罐框架的缓冲器不应破裂或损坏。混合槽,料斗,主卸料槽和辅助卸料槽的叶片不应明显磨损或变形。
2. The buffer of mixing tank frame shall not be broken or damaged. The blades of mixing tank, hopper, main discharge tank and auxiliary discharge tank shall not be obviously worn or deformed.
3.搅拌槽,进料斗,主排水槽或辅助排水槽中不得有干净的混凝土块。
3. There shall be no clean concrete blocks in the mixing tank, feed hopper, main drainage tank or auxiliary drainage tank.
(4)防洪系统检查规则:
(4) Flood control system inspection rules:
1.取力器工作平稳,压力符合设计要求,无泄漏。
1. The power take-off works smoothly, the pressure meets the design requirements, and there is no leakage.
2.液压系统的组件必须完整,并且系统的工作压力必须符合手册的要求。
2. The components of the hydraulic system must be complete, and the working pressure of the system must meet the requirements of the manual.
3.液压油的类型,质量,数量和使用必须符合相关规定。当热泵运行时,油温不得超过80°C,并且管路连接必须可靠。
3. The type, quality, quantity and use of hydraulic oil must comply with relevant regulations. When the heat pump is running, the oil temperature should not exceed 80 ℃ ° C. And the pipeline connection must be reliable.
4.每个防洪组件的运动必须灵活可靠。
4. The movement of each flood control component must be flexible and reliable.

截屏,微信识别二维码