Do you know the driving device of the fully automatic mixer? Its function is to drive the concrete storage tank to rotate. If the drive device fails, the entire concrete storage tank will not rotate, which will lead to the scrapping of the concrete in the vehicle, or even the whole tank of concrete will be condensed in the tank, resulting in the scrapping of the vehicle. So we should do a good job in its maintenance.
1. Ensure that the hydraulic oil is clean. The working environment of the fully automatic mixer truck is harsh, so it is necessary to prevent the dirty cement sand from entering the hydraulic system. The hydraulic oil shall be replaced regularly according to the requirements of the user manual. Once the hydraulic oil is found to be mixed with water or sediment during the inspection, immediately stop the machine to clean the hydraulic system and replace the hydraulic oil.
2. The universal rotating part is the part with frequent faults. It should be filled with lubricating grease on time, and the wear should be checked frequently, and repaired and replaced in time. The team should have a spare cardan shaft assembly to ensure that it can resume work in dozens of minutes in case of failure.
3. Ensure that the hydraulic oil cooling device is effective. The hydraulic oil radiator shall be cleaned regularly to prevent the radiator from being blocked by cement. Check whether the electric fan of the radiator operates normally to prevent the hydraulic oil temperature from exceeding the standard. As long as the hydraulic oil of the hydraulic part is clean, there are few general faults; However, different manufacturers have different service life.
The above is the maintenance method of the driving device of the fully automatic mixing truck. I hope you can maintain it regularly, improve work efficiency and extend its service life. If you have any doubts or needs about this device, please contact us ！