In addition to the filling rate of the mixing drum, the equation of the spiral blade, the spiral angle of the blade and the height of the blade, the factors that affect the concrete pushing, overturning and mixing effect in the automatic mixer truck also have the form of the blade. Now let's talk about the difference between T-shaped blade and I-shaped blade in the automatic mixer.
At the early stage of the development of automatic mixer in China, I-shaped blades were used. At that time, concrete segregation often occurred. With the technical improvement and product quality improvement, T-shaped blades began to appear. Since then, the market feedback on the concrete segregation of mixer trucks has rarely occurred.
The fully automatic mixer is different from the mixer, which can quickly mix the concrete evenly in just a few tens of seconds, while the mixer takes several minutes to mix it evenly. The concrete mixing of the mixing host is forced mixing, while the mixer truck is semi self dropping and semi forced mixing.
The structure of T-shaped blade is similar to that of I-shaped blade, which is added with a long mixing shovel. It can strengthen the ability of concrete pushing, lifting and forced mixing. From the above mixing principle analysis, T-shaped blade is better than I-shaped blade in mixing concrete.
T-shaped blade type is helpful to improve the mixing performance of automatic mixer truck, and can effectively improve the current situation of concrete segregation. For mixer trucks with I-shaped blades in the market, if concrete segregation often occurs during transportation, the vehicle can be technically modified, that is, welding mixing blades on the top of I-shaped blades will effectively reduce the failure rate of concrete segregation.
What is the difference between T-shaped blade and I-shaped blade in automatic mixer? The above is the content explained for this problem. I hope you can help me. If you have any doubts or needs, you can come to our website at any time Message consultation!