In fact, pay more attention to some matters during the use of the concrete mixer, otherwise it is very easy to have a variety of failures to hinder the construction, affect the progress of the whole project, and may also cause damage to the operators and equipment. The following sections will talk about the precautions for the construction of the concrete mixer.
The concrete mixer truck has a high center of gravity and is prone to accidents at high speed. Decelerate and downshift in advance before turning, and try not to brake when turning. Observe whether the mixing tank is rotating at any time, and slow down the speed as much as possible. If the speed is too high, the vehicle will swing and roll over.
The mixer needs to stop the tank at the road section with large inclination angle. When walking to the road section with large inclination angle when fully loaded, stopping the rotation of the tank body can make the vehicle travel more smoothly.
In case of uneven road surface and potholes, use appropriate low-speed gear to pass through, so as to ensure that the car has explosive force at any time. Avoid sundries. Start the car smoothly. Don't shift down randomly. Shift down in advance to keep the car fully powered.
Always test the brakes before driving for a long time or going downhill. It is forbidden for the mixer truck to slide down the slope in neutral gear, and the low-gear engine is used to slow down. If there is a curve in the downhill section, it is necessary to slow down in advance, then reduce the gear and then slow down when turning. The effect of braking in gear is good.
Before transportation, plan the route in advance and pay attention to the height limit. The road conditions on the construction site are complex. Be careful of trees and prevent cables from being scraped.
Here are the precautions for driving the concrete mixer during construction. I hope they can help you. If you have any problems that need to be solved, please come to our website first Consult!